665 Leather Neoprene and Fetish Clothing: Bipolar Electrode Double Cock Loop 6mm

SKU: 23295 Bipolar Electrode Double Cock Loop 6mm - Yellow

Description

This double cock loop enables you to quickly achieve two things. Firstly the insulation on the top half of the lower loop isolates the Dorsal nerve. This means if you use this loop with a pad or loop electrode on your glans, you will stimulate both the Dorsal and Perineal nerves at the same time - bonus.

The front cock loop is designed to be used in conjunction with a pad electrode behind the anus or with an insertable butt plug style electrode to directly stimulate the prostate.

Used in this way with two channels it delivers crisp and intense sensations target at the Dorsal and Perineal nerves as well as the Prostate.

It also keeps things neat and tidy.

The two plugs can be removed to allow a second plug to be fitted to each loop, so either can become the base electrode in a tri-phase configuration.

You can also move the plugs so the protruding conductive rubber either exits the electrode along the length of the penis or tangential to is giving you more options for cable management.

Each of these electrodes will be printed in BLACK PLA.

This electrode comes with two 6mm conductive rubber loops that take 2mm plugs, the lower one is 10"/25.4cm long, and the upper one is 8"/20.3cm long. Once you have initially fitted it, you can trim these down to a manageable length.

It will be dispatched un-painted but with 6mm conductive rubber tubing already fitted.

Dimensions

Inner Diameter: 1.5"/3.8cm
Hole Diameter: 7mm
Colour: White
Conductive Rubber Diameter: 6mm
Plug/Socket Size: 2mm
Electrode Target Area: Penis
Material: PLA

Care Instructions

Material

This product is 3D printed in ABS, a very strong plastic with excellent mechanical properties. Once printed I post-process the components using a procedure called vapour smoothing. This uses Acetone vapour to melt and smooth the surface of the prints turning them from rough prints into smooth, shiny prints that are non-porous.

Porosity is one drawback of the 3D printing process as it leaves microscopic holes in the surface of prints that are perfect for bacteria to grow in and hard to clean. Vapour smoothing prints seals these tiny holes and imperfections, leaving the products smooth and sealed.

This is important as it makes cleaning post-play so much easier.

Product Care

After play, simply wash in warm soapy water. Anti-bacterial soap is best. Once body fluids have been washed off, allow the electrode to dry thoroughly before you store it away for later use.

A deep clean can be carried out using Isopropyl Alcohol, and this will kill bacteria and remove body oils.

Never use silicone-based lubes with conductive rubber-based electrodes as the silicone will bond to the conductive rubber, effectively destroying it and insulating it.